The crimper spec downloads below contain recommended crimp diameters and settings for designated fittings-to-hose combinations using Kurt Hydraulics crimpers. All machines are calibrated differently—these settings are for reference only. Verify the crimp diameter by measuring the middle of the crimp at half the height of the die fingers using calipers (see technical diagram below downloads). All chart units of measure are in inches. All crimp diameters are nominal and carry a tolerance of ±0.005 inches. Be sure to download a catalog if you need information on Kurt hose and coupling dimensions and to determine cut-off values.
The crimp spec downloads below refer to fittings and hoses distributed by Kurt Hydraulics. Kurt Hydraulics is always striving to optimize the performance of the products offered to customers please check periodically for changes to technical data.
Click here to find a distributor.
Crimper spec downloads
Kurt KH-80 Crimp Specs
Check the Kurt Hydraulics catalog to find cut off values and hose and coupling specifications and cross-referencing.
Verify the crimp diameter by measuring the middle of the crimp at half the height of the die fingers using calipers.
Last Updated 12/13/2021